TECHNICAL DESCRIPTION OF CONTAINERS
The base building elements are containers OFC – CONTAINER - SYSTEM
1. DIMENSIONS:
The basic dimensions of container unit according ISO standard:
|
LENGTH |
WIDTH |
HEIGHT |
outer dimensions |
6058 mm |
2438 mm |
2591 mm |
inner dimension |
5888 mm |
2268 mm |
2300 mm |
weight |
cca 2200 kg |
||
Dimensions of containers can be designed individualy according to your requirements resulting from future usage. Technologically we are abble to produce containers of following dimensions to you:
LENGTH |
WIDTH |
HEIGHT |
from 1500 to 9000 mm |
from 1000 to 3300 mm |
from 2400 to 3300 mm |
2. COLOR DESIGN:
steel frame: RAL 9002 off-white walls
exterior: RAL 9002 off white
interior – RAL 9002 off white
We are able to conform this standard colour design to your requiments in large scale of RAL-shades.
3. CONSTRUCTION OF FRAME:
The frame of container is made by self-contained steel construction ( you can triple stack these containers ), welded from blended, rolled and drawn steel sheet metals and profiles (steel grade 11 373 according to ČSN 42 0002 standard) The ground coat of frame is painted with antirusting paint, top coat is two times made with polyurethane paint in RAL-shades. If you’ll need higher antirusting protection, we are abble to made container frame from zinc-coated steel materials.
4. COMPOSITION OF FLOOR :
FROM ABOVE :
- PVC linoleum DOMO, thickness 1,5 mm in 3100-22 shade – brown marble (you can choose from cast floor on epoxide base and ceramic pave too). The ending of floor covering is made by PVC fillets in gold oak shade
- chipboard E1, thickness 22 mm ( in damp rooms like bathrooms and sanitary rooms we use cement chipboard CETRIS in the same thickness)
- vapour barier – foil FATRAPAR, thickness 0,2 mm
- heat insulation from mineral wool, thickness from 80 to 120 mm
zinc-coated shaped sheet metal, thickness 0,55 mm
ALLOWED FLOOR LOADING: from 250 to 2500 kg/m2
5. COMPOSITION OF EXTERIOR WALLS:
There are self-contained water resistant sandwitch panels with polyurethane filling used, thickness 50 mm, to exterior sheating. Interior and exterior sites of these panels are made by zinc-coated sheet metal with long-lasting anticorrosive protection. The exterior site is soft shaped, interior site is smooth, both of them are in stuke imitation design
6. COMPOSITION OF INTERIOR WALLS:
Interior walls are made by frame construction from wooden scantlings, thickness 55 mm, two-side overlined by laminate chipboard, thickness 10 mm. There is mineral wool used, thickness 40 mm like noise and heat insulation.
7. COMPOSITION OF ROOF:
FROMA ABOVE:
- zinc-coated trapezial sheet metal, thicknes 0,7 mm
- heat insulation from mineral wool, thickness from 80 to 200 mm
- vapour barier – foil JUTAFON N 170 Al
- white laminated chipboard, thickness 10 mm
The ending of ceiling is made by PVC fillets in white shade, drain of rainwater is made by PVC standpipes O63 mm in corner columns of container.
STANDARD ALLOWED ROOF LOADING: 160 kg/m2
8. EXTERIOR DOORS:
The exterior doors are made by zinc-coated sheet metal filled with polyurethane foam, solid or with various size of glazing, with door lock, three keys and white plastic handle. The most used dimension of exterior doors is 800/1970 mm. The painting of door wings and door frames by polyurethane paint is in RAL-shades.
9. INTERIOR DOORS:
The most used dimension of interior doors are 800/1970 and 600/1970 mm. The door wings are solid or with various size of glazing, with door lock, key and white plastic handle. The door wings are in white door frames. The basic colour of door wings is platinic white, but you can choose from various types of wood imitations (beech, oak, pear tree,...)
10. WINDOWS:
The window frames are white, plastic opening, swivel or fixed single or double light. The glazing is made by insulated double window glass 4/16/4 with u = 1,1 or 1,4 Wm-2K-1. The most used dimensions of windows are 900/1200 mm, 1200/1200 mm, 1500/1200 mm, 1800/1200 mm, 600/420 mm in sanitary rooms. Windows are usually equiped with outer plastic window-blinds, but they can be equiped with interior jalousies or zinc-coated exterior bars.
11. ELECTRICAL INSTALATION:
Electrical instalation is made according to valid transcriptions and standards ČSN-EN. The electrical supply is made by outside sockets CEE 400V/32A/5P or by transmission through floor or through wall to switchboard equipped with RCBO and conformable circuit breakers. The interior electrical cabling is in ceiling parts of container. To bleeding points is electrical cabling brought in construction of interior walls or in cableways on the surface of exterior walls. The containers should be equipped with following accessories:
- fluorescent lamps 1x18W, 2x18W, 1x36W, 2x36W, 1x58W, 2x58W in standard and screening design, in standard IP code 20, or in IP code 54 to damp rooms.
- lungsten lamps in IP code 20 and 54
- on and in wall mounted light switches in various designs
- on and in wall mounted sockets 230 nad 400 V in various designs
- PC and telephone sockets
- electrical wall convectors from 500 to 2500 W
- electrical hot-water boilers and throug-flow heaters in various volumes and performance and other accessories
12. SANITARY EQUIPMENT
The containers should be equipped with sanitary equipment like wash-basins, toilet bowls, urinals, sinks, showerboxes in various designs. The base colour of sanitary equipment is white.
13. OTHER EQUIPMENT AND ACCESSORIES:
The containers can be equiped with office and living furniture, kitchen units (electric range-two hot plates, rustless sink with plate rack, build-in refrigerator, upper box) and with many other equipment.
